The factory B&O audio system in the 2025 Ford Bronco is certainly a step above the Bronco’s base audio system, but that doesn’t mean there isn’t plenty of room for improvement.
The owner of this 2025 Ford Bronco 4-door hardtop came to Sweet Sounds looking for more of everything: better bass, better clarity, better staging, better imaging and simply a much more enjoyable audio system overall.
After discussing several different upgrade paths, we ultimately built a complete system around the factory Ford radio using the NAV-TV ZEN POWER9 F25 amplifier/DSP and Focal’s Complete Bronco Bundle.
The finished result sounds absolutely fantastic while retaining the Bronco’s factory radio, factory controls and clean interior appearance.
Watch the Complete 2025 Ford Bronco Audio Build
In the video below, Jeff walks through the factory B&O equipment, the new Focal speakers and enclosures, NAV-TV ZEN POWER9 installation, sound damping, DSP integration and some of the unique features we’re able to retain through the Ford factory radio.
Watch the full video here:
Starting with the Factory B&O System
This Bronco arrived with Ford’s upgraded B&O audio package.
The factory system uses small speakers throughout the vehicle, including 3.5″ speakers across the dash and in the rear pods, 6.5″ speakers in the front kick-panel locations and a small factory subwoofer in the rear cargo area side panel.
While the B&O system is better than many basic factory audio systems, the original speakers, amplification and factory processing still place limits on overall clarity, output, bass performance and the ability to create a truly convincing soundstage.
For this build, nearly all of that changed.
Focal Complete Bronco Bundle
For the speakers, we used the Focal Complete Bronco Bundle, which provides a very well thought out vehicle specific solution for the Bronco.

You can see the complete Focal package here: https://www.focal-america.com/product/complete-bronco-bundle/
Up front, we installed Focal’s Flax three-way component system.
The front stage consists of:
- 6.5″ Focal Flax midbass drivers mounted in the factory kick-panel locations
- 80mm (3″) Focal Flax midrange speakers mounted in the dash
- Focal tweeters mounted alongside the midrange speakers in the dash
- Together, these are all part of the Focal PS 165 F3E — Flax Evo 3-way front component set
Focal supplies the necessary Bronco-specific mounting pieces, allowing the new speakers to fit cleanly into the vehicle using the Bronco3wF & BroncoFMBadp.
The factory center-channel speaker was not retained. This system was designed and tuned primarily around the driver’s seating position, allowing us to create a precise left-to-right stereo image through DSP rather than relying on a center speaker to anchor the image.
Larger Focal Rear Speakers and New Speaker Pods
The small factory B&O rear speaker pods were removed completely.
In their place, the Focal Bronco package includes larger replacement pods designed to mount directly to the Bronco’s rear structure. Each new enclosure houses a 6.5″ Focal Flax coaxial speaker, the PC 165 FE — Flax Evo 6.5″.
This provides substantially greater cone area and much better rear output than the small factory speakers while maintaining a clean, vehicle-specific appearance. The finished pods look like they belong in the Bronco rather than appearing like an aftermarket box that was simply added to the vehicle.
Focal Flax 10″ Tailgate Subwoofer
Bass duties are handled by a Focal Flax shallow 10″, the Sub P 25 FSE — Flax Evo 10″ subwoofer mounted in a BroncoTGSbox sealed enclosure attached directly to the Bronco’s tailgate.
This is a great solution for the Bronco because it provides a significant improvement in low-frequency extension and output without placing a conventional subwoofer enclosure on the cargo floor.
We also added a protective mesh grille from Memphis Audio over the woofer and applied damping material to the tailgate itself to help control resonance and rattles. The finished 10″ performs extremely well. It reaches surprisingly deep for its size while maintaining the accuracy and sound quality we wanted from the rest of the system.
NAV-TV ZEN POWER9 F25 — The Heart of the System
The heart of this entire build is the NAV-TV ZEN POWER9 F25 amplifier/DSP.
More information on the ZEN POWER9 F25 can be found here: https://navtv.com/products/NTV-KIT1051/zen-power9-f25.html
The ZEN POWER9 is an exceptionally powerful piece for modern Ford audio systems because it combines several functions into one unit. It interfaces directly with the factory Ford A2B digital audio system, provides full DSP processing and includes nine channels of amplification:
- Four channels at 70 watts
- Four channels at 150 watts
- One 500-watt subwoofer channel
For this Bronco, the lower-powered channels are used for the Focal tweeters and 3″ midrange speakers, while the 150-watt channels power the front 6.5″ midbass drivers and rear 6.5″ coaxials. The dedicated 500-watt channel powers the Focal 10″ subwoofer.
We also modified the prebuilt harness as necessary so the amplifier’s power could be routed exactly where we wanted it. The original B&O amplifier and factory subwoofer were removed, and the new ZEN POWER9 was mounted discreetly behind the factory interior panels from where the factory subwoofer was removed. Once everything is put back together, very little of the work is visible.
Full DSP Tuning for the Driver
Simply installing better speakers and more amplifier power is only part of building a great audio system. The ZEN POWER9 also gives us extensive DSP control over the system, including:
- Individual channel level control
- Electronic crossovers
- Equalization
- Time alignment
- Phase and acoustic adjustments
This Bronco was primarily tuned for the driver’s seating position.
Proper time alignment allows us to electronically compensate for the fact that the driver isn’t sitting an equal distance from every speaker. Combined with equalization and properly configured crossovers, this allows vocals and instruments to appear in the correct positions across the dashboard instead of the sound being pulled toward whichever speaker happens to be closest.
When a vocal is centered in the recording, it now sounds like it is coming directly from the center of the soundstage. That type of imaging is extremely difficult to accomplish without proper DSP processing and tuning.
Ken Ward Helps with the Final Tune
One of the coolest parts of this particular project happened, somewhat by accident, during the tuning process.
We were working with new firmware on the ZEN POWER9 and ran into a few settings that weren’t immediately obvious. During that process, Ken Ward, a longtime industry tuning expert and consultant for NAV-TV, gave us a call and helped us work through the issue. Once we had that sorted out, Ken went even further and offered to help with a remote tune. Ken remotely logged into our shop computer and worked through the tuning process with us.
Ken has been involved in professional mobile audio tuning for many years and has taught classes and trained installers throughout the United States, so having him jump in and lend a hand on this Bronco was a pretty unique opportunity. A huge thank you to Ken for the after hours assistance and support.
Using the Factory Ford Controls in New Ways
One of the really impressive features of the ZEN POWER9 integration is the ability to retain and repurpose several of the Bronco’s factory audio controls.
The factory radio and touchscreen remain completely intact.
Normally, the factory bass adjustment changes bass throughout the entire factory audio system. With the ZEN POWER9 installed, we were able to configure that factory control to function specifically as the subwoofer level control. That means the owner can increase or decrease the subwoofer directly from the factory Ford touchscreen without needing an aftermarket bass knob mounted underneath the dashboard.
We were also able to repurpose the factory speed-compensated-volume selections to access different DSP presets. For demonstration purposes, we configured one preset without the system’s normal equalization and time alignment. This allows the owner to quickly switch between the fully tuned system and a much more basic configuration to hear exactly what the DSP tuning contributes. It’s a pretty dramatic comparison!
Tuned for Sound Quality — But Still Capable of Getting Loud
The primary goal of the system is accurate, articulate sound quality with a strong front soundstage.
However, a Bronco is also a vehicle designed to be driven with the roof off and windows down. We made sure the system could handle that too. For normal listening, the fader can be positioned toward the front to maintain the best possible image across the dashboard. If the top is off, the windows are down and the owner wants considerably more output, resetting the fader brings much more energy from the rear Focal speakers. The soundstage isn’t quite as precise in that configuration, but the system gains a tremendous amount of overall output.
In other words, it can be refined and accurate when you want serious sound quality — or it can absolutely rip when you’re enjoying an open-air drive!
Strategic Sound Damping
We also treated several areas of the Bronco with sound damping material.
The rear cargo-floor area received substantial treatment of Soundskins material because the factory structure consists of relatively thin metal that can easily resonate once a much more powerful audio system is installed.
We also applied damping and sealing treatment around the front midbass speaker mounting areas. This not only helps reduce vibration but also seals several factory openings around the speaker mounting locations so the front midbass drivers aren’t wasting energy through unnecessary air leaks.
Additional damping was used inside the tailgate and around the license-plate area to eliminate rattles caused by the new subwoofer. These details may not be as exciting as a new amplifier or speaker, but they’re an important part of getting the most from the equipment.
A Factory-Looking Bronco with a Completely Different Audio Experience
Once everything was reassembled, almost all of the installation disappeared behind the factory interior.
- The Ford radio and touchscreen remain unchanged.
- The amplifier is hidden.
- The front speakers sit beneath clean factory-style grilles.
- The larger rear Focal pods integrate nicely with the Bronco’s interior.
- The tailgate-mounted subwoofer preserves the usable cargo-floor area.
What changed dramatically is the sound.
At vehicle pickup, we spent approximately 25 minutes with the owners going through the completed installation, explaining how the system was designed and demonstrating the different settings and tuning features. We then listened to several test tracks followed by some of our favorite sound-quality recordings.
They absolutely loved the finished system. That’s one of our favorite parts of doing this work.
Looking to Upgrade the Audio System in Your Ford Bronco?
There are many different ways to approach a Bronco audio upgrade depending on your goals and budget. That could mean adding better bass, upgrading a few speakers, adding DSP processing or building a complete system like this one. Many of the same NAV-TV integration and DSP concepts used in this Bronco also apply to other late-model Ford vehicles, including F-150 and Super Duty trucks.
If you’d like to discuss what’s possible in your vehicle, contact us here.

Leave a Reply