Sweet Sounds

VEHICLE IMPROVEMENT PROFESSIONALS

1418 N. Riverfront Dr. Mankato, MN
  
Contact Us: (507) 345-8863
  • Home
  • Services
    • Car Audio
    • Custom Fabrication
    • Driving Safety
    • Factory Audio System Repair
    • Factory Radio Integration
    • Heated Seat Installation
    • Installation Services
    • Lighting
    • Marine Audio
    • Mobile Video
    • Motorcycle Audio
    • Remote Start
    • Window Tint
  • Gallery
  • About Us
    • Why Choose Us
    • Meet The Team
    • Job Openings
    • Hours and Directions
  • Sales & Promos
  • Blog
    • Articles
    • Featured Installations
    • Installations
    • Products
  • Space for Lease
  • Contact Us
  • You are here: Home / ARTICLES / Do I Have To Use Both Coils on My Car Audio Subwoofer?

    Do I Have To Use Both Coils on My Car Audio Subwoofer?

    November 8, 2020 By BestCarAudio.com Leave a Comment

    Subwoofer Coil

    A while back, we took a look at the difference between single and dual-voice-coil subwoofers. In a nutshell, there is no benefit or drawback to either choice. The options exist so you can present the amplifier you have chosen with a load impedance that allows it to make power reliably. There have been many instances where consumers bring a subwoofer into a car stereo shop in hopes of using it in their vehicle only to find out it’s not the right impedance. They need a 4-ohm sub instead of a dual 4-ohm. The question then becomes, can you use just one of the voice coils? That’s a fair question, and it deserves a detailed answer.

    Can You Use Only One Subwoofer Voice Coil?

    If you look at the voice coil former and the winding of a single-voice-coil sub, you’ll find a single positive and negative connection. On a dual-voice-coil sub, there are two pieces of wire and two sets of connections. The coils can be wired in series, in parallel or individually to power the subwoofer.

    Car audio installers can use a set of specifications called Thiele/Small parameters in conjunction with modeling software to predict the performance of a subwoofer in a specific enclosure. All subwoofer manufacturers provide these specifications with both coils in use.

    The short answer about using one coil is no. Using one coil not only affects the thermal power handling capabilities of a subwoofer, but it also changes the strength of the magnetic field and alters the Thiele/Small specifications. Rather than explain the math involved in the change, let’s use an example.

    Subwoofer Coil
    Some subwoofers have all four voice coil terminals together in a single block. This Sony XS-GSW121D is a great example.

    Thiele/Small Parameter Changes

    Let’s start by measuring the parameters of an inexpensive 12-inch dual-voice-coil subwoofer. We measured the subwoofer with both coils wired in parallel, then we disconnected one coil and repeated the test. The results are in the chart below:

    Subwoofer Coil
    Thiele/Small parameters for the same subwoofer using one voice coil, and both voice coils wired in parallel.

    Sealed Enclosure Performance

    We modeled the subwoofer performance using both voice configurations in VituixCAD 2 software. We started with a simple sealed (acoustic suspension) enclosure with a net internal volume of 1.08 cubic feet. Graph 1 shows the output of the subwoofer with 2.83 V (which is 8-watts into a 4-ohm load) applied to the coil. The response is nice and smooth, with a good transition from the midbass region and very little ripple. The Qtc (Total Q Factor) for the system with both coils connected is 0.8. This is a good balance between low-frequency extension, efficiency and low-distortion operation. The black trace that slopes down on the left shows predicted SPL.

    Subwoofer Coil
    Graph 1 – 12-inch DVC in 1.08 cubic feet with both voice coils wired in parallel.

    Graph 2 shows the response of the same driver when only one voice coil is connected. You can see that the overall output of the system has decreased significantly and that there is a lot more ripple (a big bump in the response around 57 Hz. It’s also worth noting that the total system Q has jumped to 1.18. This Qtc value is quite high and will add resonance and distortion to the system.

    Subwoofer Coil
    Graph 2 – 12-inch DVC in 1.08 cubic feet with only one of the two coils in use.

    Vented Enclosure Performance

    Next, we designed a vented (bass reflex) enclosure using the specs taken with both coils in parallel. We simulated a 2-cubic-foot enclosure with a vent tuned to 35 Hz. As you can see from Graph 3 below, using both voice coils results in relatively smooth performance across the entirety of the operating range. The system efficiency has increased dramatically as compared to the sealed enclosure, with a jump in predicted output from 87 dB to 94 dB with the same amount of power.

    Subwoofer Coil
    Graph 3 – 12-inch DVC in 2.0 cubic feet tuned to 35 Hz with both voice coils wired in parallel.

    Finally, we can see in Graph 4 how poor the performance of the subwoofer is with only one coil connected. Output at 40 Hz has dropped by 4.5 dB, and the overall response definitely isn’t as smooth.

    Subwoofer Coil
    Graph 4 – 12-inch DVC in 2.0 cubic feet tuned to 35 Hz with only one of the two coils in use.

    Make Sure Your Subwoofers are Wired Properly

    The above simulations clearly demonstrate the importance of using car audio subwoofers as they were designed. Your installer will need to wire both voice coils to your amplifier to ensure that the subwoofer maintains its power rating and functions the way the manufacturer designed it. If you have any questions, work with your local specialty mobile enhancement retailer.

    This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

    Share this:

    • Click to share on Facebook (Opens in new window) Facebook
    • Click to share on X (Opens in new window) X
    • Click to share on LinkedIn (Opens in new window) LinkedIn
    • Click to email a link to a friend (Opens in new window) Email

    Related

    Subwoofers and Amplifiers–Lets Talk About Ohms and Loads

    Subwoofers and Amplifiers – Let’s Talk About Ohms and Loads

    A few weeks ago, we were browsing a few car audio related Facebook groups and Reddit subreddits. We saw the same question come up time after time: “I have two dual 2-ohm voice coil subs; how do I show the amp a 1-ohm load to make max power?” It wasn’t…

    July 31, 2022

    In "ARTICLES"

    Voice Coil

    Are Single or Dual Voice Coil Subwoofers Better?

    When it comes to buying subwoofers, a lot of people have questions or make assumptions about the benefits and drawbacks of single voice coil and dual voice coil versions. Understanding the differences between them requires a slightly enhanced understanding of how an amplifier works. We cover both topics in this…

    November 27, 2016

    In "ARTICLES"

    Car-Audio-Myths-DVC-Subwoofer-Power-Handling-Lead-in

    Car Audio Myths: DVC Subwoofers Can Handle More Power

    We’re back to bust another car audio myth wide open. This article will discuss the myth that DVC subwoofers can handle more power than a single voice coil driver. After some research, it’s clear that consumers seem to think dual voice coil (DVC) subwoofers have the equivalent of two separate…

    June 16, 2024

    In "ARTICLES"

    Filed Under: ARTICLES, Marine Audio, RESOURCE LIBRARY

    About BestCarAudio.com

    BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

    Leave a Reply Cancel reply

    Your email address will not be published. Required fields are marked *

    Remote Start Packages

    Search Our Installs and Articles

    Why Choose Us?

    Why Choose Us

    Vast Experience and Expertise Counts The number one reason to choose Sweet Sounds is our vast experience that has provided us with the expertise to ensure your experience as a client is unmatched. … [Read More...]

    Car Audio

    Car Audio

    Enjoy Great Sound! At Sweet Sounds, we aim to deliver incredible sounding car audio systems. Whether it’s a set of replacement speakers, a subwoofer add-on or an entire reference-quality audio system … [Read More...]

    Join Our Email List

    Tags

    2008 2015 2016 2017 Alpine Amplifiers Android Auto Apple CarPlay ARC Audio AudioControl Backup Cameras Bluetooth Car Starter Chevy Compustar Digital Designs DroneMobile Drone Mobile Firstech Focal Ford Harley Davidson Heated Seats Kia Memphis Memphis Car Audio Momento Nissan Polaris Processors Radios Remote Car Starter Remote Start Road Glide Rockford Fosgate Sale SiriusXM Sony Speakers Stinger Street Glide Subwoofers Toyota window film window tint

    Location


    Get Directions to Sweet Sounds

    Connect With US

    • Facebook
    • Instagram
    • Twitter
    • YouTube

    Hours

    Monday, Tuesday, Wednesday, Thursday, Friday9:00 am – 5:00 pm

    Closed Saturday and Sunday

    Copyright © 2025 Sweet Sounds · Privacy Policy · Website by 1sixty8 media, inc. · Log in

     

    Loading Comments...
     

      Notifications